|
This is the best Concrete Fastener Method I know for this application. These Brackets aren't going ANYWHERE. Makita XGT are some killer tools for sure.
|
|
|
|
Some will say they can tie faster 🤷â€â™‚ï¸
•
This is their Newest one deep tie rebar tier
This one is capable of tying #8 and #7 rebar and up to 5000 ties per charge.
|
|
|
|
“What’s your favorite tool?†- THIS! The Makita XGT 40V High Speed Dust Blower is my most used tool for so many different things.
|
|
|
|
This has to be one of the coolest XGT tools Makita makes...
|
|
|
|
Framing has changed. Impact drivers are as important as hammers. 8" @strongtie SDWS TIMBER Screws pulls the 6x6 column to the 6x6 hold down post in the garage. #worksmarternotharder #framer #framersofig @makitatools doesn't need that big of a battery btdubbs.
|
|
|
|
Some boarding action
Cut the board, mark out the plugs, add some adhesive so the screws won’t pop and you can use less screws. Lift the board 1/2†off the ground and put a couple screws in to hold is while I cut out the plugs with the Makita cutout tool.
|
|
|
|
Happy Saturday everyone! Running the new @makitatools lawn mower 36v battery powered thing rips.
|
|
|
|
Have you switched to a battery powered mower?
All you have to do is make sure the blade is sharp and batteries are charged. Here’s some features of the Makita 40v XGT. The handle folds and you can stand it up so you don’t take as much room in the shed or garage.
|
|
|
|
5.5" x 16.5" x 25' Roseboro X Beam glulam spans the garage and eliminates a column. The @makitatools XGT chainsaw makes quick work if this beam. For exposed cuts, I recommend a beam saw. I'm working on a full video about glulams. A very fascinating subject.
|
|
|
|
During a visit to the @makitatools training center, MES Sales Representative Tim Faro and members of the @rochester_fire_department conducted comparative evaluations of various saw brands. After using the saws, Truck 10 decided to incorporate Makita tools into their equipment lineup. The versatility of the 40v Makita battery platform, which powers multiple tools with a single battery type, enables them to expand their collection of Makita tools efficiently.
|
|
|
|
Anchor bolts within 12" of mudsill joints. @strongtie 5/8" x 8" Titen HD. @makitatools 3 cutter bit is fast. I left that in real time. @dudetools decade + old deep socket and 3/4" impact wrench. Hearing protection @isotunes discount code Timmy10. I like to drill the wood plate with a regular spade bit to speed things up a little.
|
|
|
|
Quite a few questions regarding how the @makitatools 40 volt planer does on the wood. Like butter 👌
|
|
|
|
When nothing else will do you buy the beast. @makitatools XGT 10 1/4†rear handle saw. Handles full depth 3 1/2†wet or dry treated lumber with ease.
|
|
|
|
A lot of guys don’t have a 10 1-4 saw to cut both pieces at once whether it be plates,jacks,headers or whatever ya need multiples of at the exact size. So sticking with cutting efficiently and trying to not use your tape as much mark once and cut into the piece below to mark your second piece perfectly accurate to the first piece. I wouldn’t have even pulled my tape out the first time if I had the framing square out (it fell down the stair hole).
|
|
|
|
What’s your favorite impact driver? This is mine. 40v XGT why, because it’s a one stop shop basically. I don’t wanna have 4 different ones at the same time if I only need one. Plus my wallet likes that mentality as well. 4 speeds which I can preset at the bottom of the handle or on the fly above the trigger so I don’t necessarily have to disengage from the position I’m in to switch if need be. I can also easily feather the trigger if I need to be in between speeds. I having been having some pretty heated debates on the subject where some guys one it full speed all the time with no other functions. What do you guys think about this?
|
|
|
|
Do you have a favorite Impact? Years later, the @makitatools subcompact is hands down one of my top reached for impacts. It’s light, it’s small for tight spaces and reliable. It doesn’t have all the juice needed for bigger projects like deck building that the 40 volt beast does, but it’s a trusty friend in my arsenal.
|
|
|
|
Over here working on the forklift and I can’t just get up and leave to grab lunch. So I brought it with me. Being on sites with no power and not being able to leave or it is just pain in the butt to get out of the site, hell even going camping made this a no brainer. Whether it’s cooking up a sausage or reheating my coffee. It can do that.
|
|
|
|
The current Snocross race season is over and the Warnert Racing team is looking ahead to next season.
|
|
|
